Input Clutches
WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - INPUT SHAFT |
| 2 - UNDERDRIVE CLUTCH |
| 3 - OVERDRIVE CLUTCH |
| 4 - REVERSE CLUTCH |
| 5 - OVERDRIVE SHAFT |
| 6 - UNDERDRIVE SHAFT |
Three hydraulically applied input clutches are used to drive planetary components. The underdrive, overdrive, and reverse clutches are considered input clutches and are contained within the input clutch assembly. See Fig 1. The input clutch assembly also contains:
- Input shaft
- Input hub
- Clutch retainer
- Underdrive piston
- Overdrive/reverse piston
- Overdrive hub
- Underdrive hub