LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (41TE Automatic Transmission (Service Information)) >> 41TE Automatic Transaxle >> Diagnosis And Testing >> Hydraulic Pressure Tests >> TEST THREE-OVERDRIVE CLUTCH CHECK (3rd and 2nd Gear)

TEST THREE-OVERDRIVE CLUTCH CHECK (3rd and 2nd Gear)

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
  1. Attach gauge to the overdrive clutch tap.
  2. Move selector lever to the (OD) position.
  3. Allow vehicle wheels to turn and increase throttle opening to achieve an indicated vehicle speed of 20 mph. Vehicle should be in 3rd gear.
  4. Overdrive clutch pressure should read 74 to 95 psi.
  5. Move selector lever to the (3) position and increase indicated vehicle speed to 30 mph.
  6. The vehicle should be in second gear and overdrive clutch pressure should be less than 5 psi.
  7. This test checks the overdrive clutch hydraulic circuit as well as the shift schedule.
scientia non olet · About LEMON Manuals