LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 63 (41TE Automatic Transmission (Service Information)) >> 41TE Automatic Transaxle >> Diagnosis And Testing >> Clutch Air Pressure Tests >> Low/Reverse Clutch

Low/Reverse Clutch

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Apply air pressure to the low/reverse clutch feed hole (rear of case, between 2 bolt holes). Then, look in the area where the low/reverse piston contacts the first separator plate. Watch carefully for the piston to move forward. The piston should return to its original position after the air pressure is removed.

scientia non olet · About LEMON Manuals