Red Brake Warning Indicator
WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| CONDITION | POSSIBLE CAUSES | CORRECTION |
|---|---|---|
| RED BRAKE WARNING INDICATOR ON | 1. Parking brake lever not fully released. | 1. Release parking brake lever. |
| 2. Parking brake warning switch on parking brake lever. | 2. Inspect and replace switch as necessary. | |
| 3. Brake fluid level low in reservoir. | 3. Fill reservoir. Check entire system for leaks. Repair or replace as required. | |
| 4. Brake fluid level switch. | 4. Disconnect switch wiring connector. If lamp goes out, replace switch. | |
| 5. Mechanical instrument cluster (MIC) problem. | 5. Refer to Appropriate Diagnostic Information. | |
| 6. ABS EVBP malfunction. | 6. Refer to ABS - ELECTRICAL DIAGNOSTICS article and Appropriate Diagnostic Information. |