LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (2.4L Engine (Service Information)) >> Valve Timing >> TENSIONER & Pulley-Timing Belt >> Removal >> Timing Belt TENSIONER Assembly

Timing Belt TENSIONER Assembly

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Camshaft Sprocket
GC0021189Courtesy of CHRYSLER LLC
  1. Remove timing belt. Refer to REMOVAL .
  2. Remove timing belt idler pulley.
  3. Hold camshaft sprocket with Camshaft Sprocket Holder 6847 (1) while removing bolt. See Fig 1. Remove both camshaft sprockets.
    Fig 2: Rear Timing Belt Cover Fasteners
    GC0021277Courtesy of CHRYSLER LLC
  4. Remove rear timing belt cover fasteners (1,2) and remove cover from engine. See Fig 2.
    Fig 3: Timing Belt Tensioner/Bracket Assembly
    GC0042920Courtesy of CHRYSLER LLC
    1 - BOLT
    2 - TENSIONER ASSEMBLY
    3 - BOLT-INSTALL FOR PROPER ALIGNMENT
  5. Remove lower bolt (1) attaching timing belt tensioner assembly to engine and remove tensioner (2)as an assembly  . See Fig 3.
scientia non olet · About LEMON Manuals