LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (2.4L Engine (Service Information)) >> Valve Timing >> Belt And Sprockets-Timing >> Removal >> Crankshaft Sprocket

Crankshaft Sprocket

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Crankshaft Sprocket
GC0021079Courtesy of CHRYSLER LLC
1 - CRANKSHAFT SPROCKET REMOVER 6793
2 - CRANKSHAFT SPROCKET REMOVER INSERT C-4685-C2
3 - CRANKSHAFT SPROCKET
  1. Remove upper and lower front timing belt covers. Refer to REMOVAL .
  2. Remove timing belt. Refer to REMOVAL .
  3. Remove crankshaft sprocket (3) using Crankshaft Sprocket Remover 6793 (1) and Crankshaft Sprocket Remover Insert C-4685-C2 (2). See Fig 1.
scientia non olet · About LEMON Manuals