Oil Pump

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Crankshaft Sprocket - Removal

Courtesy of CHRYSLER LLC

1 - CRANKSHAFT SPROCKET REMOVER 6793

2 - CRANKSHAFT SPROCKET REMOVER INSERT C-4685-C2

3 - CRANKSHAFT SPROCKET

Disconnect negative cable from battery.
Remove timing belt. Refer to REMOVAL .
Remove timing belt rear cover. Refer to REMOVAL .
Remove oil pan. Refer to REMOVAL .
Remove crankshaft sprocket (3) using Crankshaft Sprocket Remover 6793 (1) and Crankshaft Sprocket Remover Insert C-4685-C2 (2). See Fig 1.

Fig 2: View Of Crankshaft Key
Courtesy of CHRYSLER LLC

1 - CRANKSHAFT KEY
Remove crankshaft key (1). See Fig 2.

Fig 3: Identifying Oil Pump & Bolts
Courtesy of CHRYSLER LLC

1 - BOLTS

2 - BOLTS

3 - OIL PUMP
Remove oil pick-up tube.
Remove oil pump (3) and front crankshaft seal. See Fig 3.