LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (2.4L Engine (Service Information)) >> Lubrication >> Lines-Oil Cooler >> Installation >> Oil Cooler & Lines

Oil Cooler & Lines

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Oil Cooler Seal
GC0021263Courtesy of CHRYSLER LLC
  1. Replace oil cooler seal (1). See Fig 1.
    Fig 2: Oil Cooler Alignment
    GC0021264Courtesy of CHRYSLER LLC
  2. Lubricate seal and position oil cooler to oil filter adapter, aligning notch (1) to tab (2). See Fig 2.
    Fig 3: Oil Cooler Connector Bolt
    GC0021262Courtesy of CHRYSLER LLC
  3. Install oil cooler connector bolt (2). Torque connector bolt to 55 N.m (41 ft. lbs.). See Fig 3.
  4. Install oil filter.
    Fig 4: Oil Cooler & Lines
    GC0021261Courtesy of CHRYSLER LLC
  5. Connect oil cooler coolant hoses (1,2). See Figure.
  6. Lower vehicle.
  7. Fill cooling system. Refer to COOLING .
scientia non olet · About LEMON Manuals