Valve And Valve Spring
WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - VALVE LOCKS |
| 2 - VALVE RETAINER |
| 3 - VALVE SPRING |
| 4 - VALVE STEM SEAL |
| 5 - VALVE STEM |
- With cylinder head removed from cylinder block, compress valve springs (3) using a universal valve spring compressor.
- Remove valve retaining locks (1), valve spring retainers (2), valve springs (3), and valve stem seals (4).
- Before removing valves (5), remove any burrs from valve stem lock grooves to prevent damage to the valve guides. Identify valves, locks and retainers to insure installation in original location.
- Inspect the valves. Refer to INSPECTION .