LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (2.4L Engine (Service Information)) >> Cylinder Head >> Seal(S)-Camshaft Oil >> Removal >> Camshaft Oil Seal(S)

Camshaft Oil Seal(S)

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing/Installing Camshaft Sprocket
GC0021189Courtesy of CHRYSLER LLC
  1. Remove timing belt. Refer to REMOVAL .
  2. Hold each camshaft sprocket with Camshaft Sprocket Holder 6847 (1) while removing center bolt. See Fig 1.
  3. Remove camshaft sprockets.
  4. Remove rear timing belt cover. Refer to REMOVAL .
    Fig 2: Removing Camshaft Oil Seal With C-4679A
    GC0021190Courtesy of CHRYSLER LLC
    1 - SPECIAL TOOL C-4679
  5. Remove camshaft seal using Camshaft Seal Remover C-4679A (1). See Fig 2.
CAUTION: Do not nick shaft seal surface or seal bore.
scientia non olet · About LEMON Manuals