Cylinder Head: Camshaft(S): Description: Camshaft(S)

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Cylinder Head and Camshafts

Courtesy of CHRYSLER LLC

1 - CAMSHAFT BEARING CAPS

2 - PLUG

3 - CAMSHAFT

4 - CYLINDER HEAD

5 - CAMSHAFT OIL SEAL

Both camshafts have six bearing journal surfaces and two cam lobes per cylinder. See Fig 1. Flanges at the rear journals control camshaft end play. Provision for a cam position sensor is located on the intake camshaft on the rear of the cylinder head. A hydrodynamic oil seal (5) is used for oil control at the front of the camshaft.