LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (2.4L Engine (Service Information)) >> Cylinder Head >> Adjusters-Hydraulic Lash >> Installation >> Hydraulic Lash Adjusters

Hydraulic Lash Adjusters

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Hydraulic Lash Adjuster
GC0021202Courtesy of CHRYSLER LLC
  1. Install hydraulic lash adjuster. See Fig 1. Ensure the lash adjusters are at least partially full of engine oil. This is indicated by little or no plunger travel when the lifter is depressed.
  2. Install rocker arm. See INSTALLATION .
  3. Repeat installation procedure for each hydraulic lash adjuster.
    Fig 2: View Of Intake Cover
    GC0042795Courtesy of CHRYSLER LLC
    1 - INTAKE MANIFOLD COVER
    2 - MAP SENSOR
  4. Install cylinder head cover. Refer to INSTALLATION .
  5. Install upper intake manifold. Refer to INSTALLATION .
  6. Install intake manifold cover (1).
scientia non olet · About LEMON Manuals