Air Cleaner Housing
WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Courtesy of CHRYSLER LLC
| 1 - CLEAN AIR HOSE |
| 2 - AIR CLEANER HOUSING |
| 3 - FRESH AIR INLET DUCT |
| 4 - PDC MOUNTING BRACKET |
- Disconnect the throttle body air inlet hose/clean air hose (1) from the air cleaner housing (2). See Fig 1.
- Pull air cleaner housing (2) straight up to remove.
- Remove the inlet duct (3) from the air cleaner housing (2). See Fig 1.