Hose - Turbocharger To Charge Air Cooler
WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - CHARGE AIR COOLER |
| 2 - HOSE - TURBOCHARGER TO CHARGE AIR COOLER |
| 3 - NUT |
- Position hose to mounting location.
- Temporarily install nuts securing charge air cooler hose to structural collar.
- Connect hose to turbocharger.
- Connect hose to charge air cooler.
- Tighten hose clamps to 1.7 N.m (15 in. lbs.).
- Tighten nuts securing charge air cooler hose to structural collar.
- Lower vehicle.