Proportional Purge Solenoid - 2.4L Turbo

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: EVAP Purge Solenoid Location - 2.4L Turbo

Courtesy of CHRYSLER LLC

Disconnect the negative battery cable.
Remove solenoid from mounting bracket by pressing tab and pulling of the solenoid from bracket.

Fig 2: EVAP Purge Solenoid - 2.4L Turbo
Courtesy of CHRYSLER LLC

1 - Electrical Connector

2 - Vacuum Lines
Unlock and disconnect the electrical connector from the purge solenoid (1).
Remove the 2 vacuum lines (2).
Remove solenoid.