Hub And Bearing - Rear Drum Brake Vehicles
WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Before proceeding, see WARNING .
- Raise and support the vehicle. Refer to STANDARD PROCEDURE .
- Remove the wheel mounting nuts (3), then the rear tire and wheel assembly (1).
- Remove the brake drum retaining clips (5), then the drum (6). Refer to REMOVAL .
- Remove the dust cap (4) from the hub and bearing (7).
- Remove the hub nut (3), then slide the hub and bearing (7) from the spindle (10).