Lower Ball Joint
WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - BALL JOINT |
| 2 - HEADLESS GREASE FITTING |
With the weight of the vehicle resting on the road wheels, grasp the headless grease fitting (2) as shown. With no mechanical assistance or added force, attempt to move the grease fitting. If the ball joint (1) is worn, the grease fitting will move. If movement is noted, replace the ball joint.
CAUTION:
No attempt should be made to service the headless grease fitting on the ball joint. It has been purposely snapped off by the manufacturer to avoid over-greasing.