Tire And Wheel Assembly - Aluminum Wheel
WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle so that tire and wheel assembly clears ground level. Refer to STANDARD PROCEDURE .
- If the vehicle is equipped with wheel center caps that cover the wheel nuts, remove the cap with an appropriate removal tool utilizing the notch formed into the wheel near valve stem. Use care not to damage the wheel coating.
- Remove five wheel mounting (lug) nuts (3) from studs.
- Remove tire and wheel assembly (1) from hub.