Weatherstrip-Quarter Panel Outer Belt - Convertible
WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- Lower the convertible top.
- Remove the rear quarter panel trim. See REMOVAL .
- Remove inner quarter panel weatherstrip (2) from the quarter panel inner flange (1) by carefully puling upward on the weatherstrip.
- Adjust the convertible top open/close to access the four screws (2) that secure the quarter panel outer belt weatherstrip (1).
- Remove the four screws that secure the quarter panel outer belt weatherstrip to the quarter panel (3) and remove the weatherstrip.