LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Body - Interior & Exterior) >> Seats >> Cushion-Rear Seat >> Removal >> Rear Seat Cushion

Rear Seat Cushion

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Rear Seat
GC0022511Courtesy of CHRYSLER LLC
1 - REAR SEAT
  1. Remove seat from vehicle. See REMOVAL .
  2. Remove rear seat back. See REMOVAL .
    Fig 2: Seat Cushion
    GC0022556Courtesy of CHRYSLER LLC
  3. Remove seat cushion.


Fig 1: Center Shoulder Seat Belt Retractor Attaching Screw
GC0022555Courtesy of CHRYSLER LLC
  1. Remove seat from vehicle.
  2. Remove rear seat cushion side shields.
  3. Remove seat back.
  4. Remove rear seat and track assembly.
  5. Disengage J-strap attaching seat cover from the seat cushion frame.
  6. Pull cover off of the hog rings.
    Fig 2: Seat Cushion
    GC0022556Courtesy of CHRYSLER LLC
  7. Cut hog rings attaching seat cover to seat cushion pad.
  8. Remove seat cushion cover from seat cushion.
scientia non olet · About LEMON Manuals