LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Body - Interior & Exterior) >> Seats >> Bolster Cover-Rear Seat Pt-27 >> Removal >> Rear Seat Bolster Cover - Pt-27

Rear Seat Bolster Cover - Pt-27

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Bolster - Mounting Bracket
GC0022553Courtesy of CHRYSLER LLC
  1. Remove rear seat bolster from vehicle. See REMOVAL .
  2. Remove the two bolster mounting brackets.
  3. Remove push pin fasteners from upper retainer.
    Fig 2: Bolster Cover
    GC0022554Courtesy of CHRYSLER LLC
    1 - HOG RINGS
  4. Cut three hog rings (1) attaching cover together.
  5. Remove cover from foam.
scientia non olet · About LEMON Manuals