Section 30 (Body - Interior & Exterior): Liftgate: Cylinder-Lock: Removal: Cylinder-Lock
WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Do not remove the E-clip from the back of the lock cylinder.
- Disconnect and isolate the negative battery cable.
- Remove the latch control. See REMOVAL .
- Disengage the retainer clip that secures the lock cylinder (2) to the lifgate (1) and remove the lock cylinder and gasket.