LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Body - Interior & Exterior) >> Interior >> Rear Quarter Panel Trim - Convertible >> Removal >> Rear Quarter Panel Trim - Pt-27

Rear Quarter Panel Trim - Pt-27

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Check Strap
GC0022409Courtesy of CHRYSLER LLC
1 - CHECK STRAP
2 - ATTACHING SCREW
  1. Fold rear seats flat.
  2. Remove attaching screw (2) from left and right rear seat fold forward check strap (1).
    Fig 2: Pivot Cover Bezel
    GC0022408Courtesy of CHRYSLER LLC
    1 - REAR SEAT PIVOT BRACKET
    2 - PIVOT COVER BEZEL
  3. Remove rear seat pivot bezels and striker bezel.
    Fig 3: Quarter Trim Panel
    GC0022417Courtesy of CHRYSLER LLC
    1 - SEAT BELT
    2 - ATTACHING SCREW(S)
    3 - FOLDING TOP PIVOT BRACKET
    4 - QUARTER TRIM BRACKET NUT
    5 - QUARTER TRIM BRACKET
    6 - REAR SEAT SUPPORT
    7 - LOWER ANCHOR ATTACHING NUT
  4. Remove rear seat. See REMOVAL .
  5. Remove rear seat lower seat belt anchor attaching bolt.
  6. Release J-strap at upper seat back slingwell.
  7. Remove bolster from rear seat back support and move bolster out of the way. See REMOVAL .
  8. Remove lower seat belt anchor at B-pillar.
  9. Remove turning loop anchor attaching bolt.
  10. Move door sill scuff plate to allow removal of quarter trim panel.
  11. Remove screws attaching quarter trim panel.
  12. Remove quarter trim panel.
scientia non olet · About LEMON Manuals