Rear Rail Assembly - Pt-27
WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
| 1 - DOOR GLASS RAIL |
| 2 - STABILIZER NUTS |
| 3 - FRONT DOOR INNER TO GLASS STABILIZER |
| 4 - DOOR GLASS CHANNEL |
| 5 - ATTACHING SCREW(S) |
| 6 - ATTACHING NUT |
- Remove door trim panel and water dam.
- Remove the lift plate attaching screws (5).
- Remove bolt attaching top of rear rail assembly to inner door panel.
- Using a suitable Allen wrench, hold jack screw stationary while removing nut attaching bottom of rear rail (1) assembly to inner door panel.
- Remove rear rail (1) assembly from vehicle and remove through access hole in inner door panel.