Switch-Power Top
WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
The power top switch is located in the instrument panel center stack (2) as an integral part of the accessory switch bezel.
The power top switch is a unit that transmits commands over the Controller Area Network (CAN) data bus to the power window regulator module, refer to DESCRIPTION for additional information. The power top switch performs the following functions:
- Power top up (switch pushed upward)
- Power top down (switch pushed downward to the first position)
- Power top express down/all windows down (switch pushed downward to the second position and held in place)
The power top switch cannot be adjusted or repaired. If the switch is damaged or inoperative the accessory switch bezel must be replaced. See REMOVAL .