Diagnostic Test
WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- 1) CHECK FOR AN ACTIVE DTC
Turn the ignition on.
With the scan tool, record and erase DTCs.
Press the TRIP/TOGGLE switch three times.
With the scan tool, read DTCs.
Does the scan tool display: B1265-TRIP/TOGGLE SWITCH STUCK?
Yes
- Replace the Instrument Cluster in accordance with the service information.
- Perform BODY VERIFICATION TEST - VER 1 .
No
- Test complete