Antenna Body And Cable
WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect and isolate the battery negative cable.
- Remove antenna mast by unscrewing mast from antenna body. On vehicles equipped with manual retractable antenna, lower antenna fully.
- Remove shroud (1), if equipped.
- Remove antenna nut (2) and adapter (3)
- Disconnect antenna body cable from instrument panel antenna cable.
- Remove inner fender shield as necessary to gain access to mounting fasteners.
- Remove antenna body and cable (2) assembly from fender (1)