Heater-Engine Block: Description: Description

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Engine Block Heater & Power Cord

Courtesy of CHRYSLER LLC

1 - BLOCK HEATER

2 - POWER CORD

The block heater (1) is mounted in a core hole (in place of a core hole plug) in the engine block, with the heating element immersed in coolant. See Fig 1.

Fig 2: Power Cord Routing

Courtesy of CHRYSLER LLC

1 - STRAP

2 - CONNECTOR

3 - POWER CORD

The engine block heater is available as an optional accessory. The heater is powered by ordinary house current (110 Volt AC) through a power cord (3) and connector (2).