LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 10 (Engine & Automatic Transmission Cooling System) >> Accessory Drive >> TENSIONER-Accessory Drive Belt >> Removal >> Removal-2.0/2.4L

TENSIONER-Accessory Drive Belt: Removal: Removal-2.0/2.4L

WARNING: This page is about a different car, the 2007 Chrysler PT Cruiser. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Automatic Belt Tensioner - 2.0L/2.4L
GC0021795Courtesy of CHRYSLER LLC
1 - TORQUE STRUT BRACKET
2 - BOLT
3 - AUTOMATIC BELT TENSIONER ASSEMBLY
  1. Remove power steering/air conditioning compressor belt. See REMOVAL .
  2. Remove tensioner mounting bolt (2) and remove tensioner assembly (3).
  3. Remove tensioner pulley, if replacing the pulley.
scientia non olet · About LEMON Manuals