LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> Emission Control System >> Evaporative Emissions >> EVAP/Purge Solenoid >> Removal >> 1.6/2.0L

EVAP/Purge Solenoid: Removal: 1.6/2.0L

  1. Remove the negative battery cable.
  2. Remove solenoid from bracket by pulling up on solenoid.
  3. Disconnect electrical connector from solenoid.
  4. Disconnect vacuum tubes from solenoid.
scientia non olet · About LEMON Manuals