LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Performance >> Testing & Diagnosis >> 2.4L Engine - DTCS P1854 To U11OC, Fuel Delivery System Check, Symptom Tests & Verification Tests >> Diagnosis And Testing >> U110C-No Fuel Level Bus Message Received >> Diagnostic Test

Diagnostic Test

  1. 1)  ACTIVE DTC 

    Ignition on, engine not running.

    With the scan tool read Powertrain DTCs.

    Is the DTC active at this time? 

    Yes 

    1. Go To step  2).

    No 

    1. Refer to the INTERMITTENT CONDITION diagnostic procedure.
    2. Perform the POWERTRAIN VERIFICATION TEST. (Refer to POWERTRAIN VERIFICATION TEST) 
  2. 2)  U0141-LOST COMMUNICATION WITH FRONT CONTROL MODULE ALSO ACTIVE 

    With the scan tool read DTCs.

    Is the U0141-LOST COMMUNICATION WITH FRONT CONTROL MODULE also set? 

    Yes 

    1. Follow the diagnostics for U0141-LOST COMMUNICATION WITH FRONT CONTROL MODULE
    2. Perform the POWERTRAIN VERIFICATION TEST. (Refer to POWERTRAIN VERIFICATION TEST) 

    No 

    1. Replace and program the Powertrain Control Module per Service Information. Refer to MODULE-POWERTRAIN CONTROL and STANDARD PROCEDURE - PCM/ECM/SKREEM PROGRAMMING .
    2. Perform the POWERTRAIN VERIFICATION TEST. (Refer to POWERTRAIN VERIFICATION TEST) 
scientia non olet · About LEMON Manuals