LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Delivery (Except Diesel) >> Fuel Tank Filler Tube >> Removal

Fuel Tank Filler Tube: Removal

Fig 1: Fuel Filler Cap
GC0021648Courtesy of DAIMLERCHRYSLER CORP.
  1. Remove the air cleaner lid and makeup air hose.
  2. Remove the negative battery cable.
  3. Loosen fuel filler tube cap.
    Fig 2: Fuel Filler Neck Removal/Installation
    GC0021649Courtesy of DAIMLERCHRYSLER CORP.
  4. Remove fuel filler neck screws.
    Fig 3: Slash Shield
    GC0021650Courtesy of DAIMLERCHRYSLER CORP.
    1 - SPLASH SHIELD
  5. Raise vehicle and support.
  6. Remove the right rear wheel.
  7. Remove the rear half of the inner splash shield (1).
    NOTE: Drain fuel tank if it is more than half full.
    Fig 4: Filler Tube
    GC0021651Courtesy of DAIMLERCHRYSLER CORP.
    1 - VAPOR RECIRCULATION TUBE
    2 - FILLER TUBE
  8. Disconnect fuel filler tube hose from fuel tank neck. Remove fuel filler tube assembly (2).