LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.4L DOHC Engine >> Sensor/Switch-Oil Pressure >> Removal

Sensor/Switch-Oil Pressure: Removal

Fig 1: Locating Oil Pressure Switch
GC0021119Courtesy of DAIMLERCHRYSLER CORP.
1 - EXHAUST MANIFOLD HEAT SHEILD
2 -OIL FILTER
3 - OIL PRESSURE SWITCH
  1. Raise vehicle.
  2. Position oil collecting container under pressure switch (3) location.
  3. Disconnect oil pressure switch electrical connector and remove switch (3). See Fig 1.
scientia non olet · About LEMON Manuals