LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> 2.4L DOHC Engine >> Seal(S)-Camshaft Oil >> Installation

Seal(S)-Camshaft Oil: Installation

Fig 1: Camshaft Seal - Installation
GC0021191Courtesy of DAIMLERCHRYSLER CORP.
1 - CAMSHAFT SEAL INSTALLER MD-998306
  1. Shaft seal surface must be free of varnish, dirt or nicks. Polish with 400 grit paper if necessary.
  2. Install camshaft seals into cylinder head using Camshaft Seal Installer MD-998306 (1) until flush with head. See Fig 1.
    Fig 2: Camshaft Sprocket - Removal/Installation
    GC0021189Courtesy of DAIMLERCHRYSLER CORP.
    1 - CAMSHAFT SPROCKET HOLDER 6847
  3. Install timing belt rear cover, (Refer to ENGINE/VALVE TIMING/TIMING BELT COVER(S) - INSTALLATION) .
  4. Install camshaft sprockets. Hold each sprocket with Camshaft Sprocket Holder 6847 (1) and tighten center bolt to 115 N.m (85 ft. lbs.). See Fig 2.
  5. Install timing belt and front covers, (Refer to ENGINE/VALVE TIMING/TIMING BELT AND SPROCKETS - INSTALLATION)  and (Refer to ENGINE/VALVE TIMING/TIMING BELT COVER(S) - INSTALLATION) .
scientia non olet · About LEMON Manuals