Lines-Oil Cooler: Removal
| 1 - COOLANT TUBES |
| 2 - COOLANT HOSES |
| 3 - OIL FILTER |
| 4 - OIL COOLER |
- Raise vehicle on hoist.
- Drain cooling system, (Refer to DRAINING COOLING SYSTEM - 2.0/2.4L ).
- Disconnect oil cooler coolant hoses (1,2). See Fig 1.
- Remove oil filter (3).
1 - OIL COOLER 2 - CONNECTOR BOLT - Remove oil cooler connector bolt (2). See Fig 2.
- Remove oil cooler (1).