1.6L SOHC Engine: Damper-Vibration: Removal

Fig 1: Vibration Damper Removal

Courtesy of DAIMLERCHRYSLER CORP.

1 - SPECIAL TOOL 1026 PULLER

2 - SPECIAL TOOL 6827A INSERT

3 - VIBRATION DAMPER

1. Disconnect negative battery cable.
2. Raise vehicle on hoist.
3. Remove the right wheel and accessory drive belt splash shield.
4. Remove accessory drive belt (Refer to COOLING/ACCESSORY DRIVE/DRIVE BELT - REMOVAL) .
5. Remove crankshaft vibration damper bolt. Remove damper using Puller 1026 (1) and Crankshaft Damper Removal Insert 6827A (2). See Fig 1.