1.6L SOHC Engine: Damper-Vibration: Installation

Fig 1: Vibration Damper Installation

Courtesy of DAIMLERCHRYSLER CORP.

1 - SPECIAL TOOL 8385

2 - VIBRATION DAMPER

1. Install crankshaft vibration damper (2) using Special Tool 8385 installer (1). See Fig 1.
2. Install vibration damper bolt. Tighten bolt to 115 N.m (85 ft. lbs.).
3. Install the accesory drive belt (Refer to COOLING/ACCESSORY DRIVE/DRIVE BELT - INSTALLATION) .
4. Install the accessory drive belt splash shield and right wheel.
5. Lower the vehicle.
6. Connect negative battery cable.