LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System & Turbocharger >> Solenoids And Vacuum Harness >> Installation

Solenoids And Vacuum Harness: Installation

  1. Slide solenoid onto mounting bracket until lock tab engages.
  2. Connect vacuum harness connector to solenoid.
  3. Connect solenoid electrical connector.
  4. Install nuts securing solenoid mounting bracket to shock tower.
scientia non olet · About LEMON Manuals