LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System & Turbocharger >> Shields-Heat >> Installation

Exhaust System & Turbocharger: Shields-Heat: Installation

  1. Position heat shield(s) to underbody.
  2. Install heat shield fasteners.
  3. Inspect heat shield to exhaust system clearances and adjust as necessary. For clearance specifications (Refer to EXHAUST SYSTEM - SPECIFICATIONS) .
  4. Lower vehicle.
  5. Start the engine and inspect for exhaust leaks. Repair exhaust leaks as necessary.
  6. Check the exhaust system for contact with the body panels. Make the necessary adjustments, if needed.
scientia non olet · About LEMON Manuals