Sunroof Sunshade: Installation
| 1 - SUNSHADE FRONT GUIDE |
| 2 - SCREWDRIVER DEPRESSING FRONT GUIDE |
- From top of the vehicle through roof opening place sunshade into position, rotating rear guide feet of sunshade into opening of track.
- Guide front sunroof feet through front opening and into the track grooves.
- Set trough assembly in position on sunroof assembly. Ensure that the trough crosses over the top of the sunshade.
1 - TROUGH 2 - TROUGH GUIDE 3 - SCREW - Install two screws (3) attaching trough guide to trough assembly. Tighten screws to 1 N.m (9 in. lbs.).