LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Electrical >> Gauges >> Interior & Exterior (2 Of 2) >> Seats >> Rear Seat >> Removal >> Convertible

Rear Seat: Removal: Convertible

Fig 1: Check Strap
GC0022409Courtesy of DAIMLERCHRYSLER CORP.
1 - CHECK STRAP
2 - ATTACHING SCREW
  1. Fold rear seats forward and remove screw (2) attaching check strap (1) on each side of vehicle.
  2. Remove latch covers. (Refer to BODY/SEATS/REAR SEAT LATCH COVERS - REMOVAL) .
    Fig 2: PT27 Seat Latch And Latching Device
    GC0022513Courtesy of DAIMLERCHRYSLER CORP.
    1 - LATCHING DEVISE
  3. Fold seat back down and then roll forward to access rear seat latch latching devices (1).
    Fig 3: PT27 Seat Latch
    GC0022512Courtesy of DAIMLERCHRYSLER CORP.
    1 - ROD
  4. To disengage latching devise, rock latching devise rearward and install a rod (1) into the hole to support latching devise in the open position.
    Fig 4: Rear Seat Latches
    GC0022514Courtesy of DAIMLERCHRYSLER CORP.
    1 - LATCH(S)
  5. With both latches (1) in the open position the seat may be removed.
    Fig 5: Pivot Bracket(s)
    GC0022515Courtesy of DAIMLERCHRYSLER CORP.
    1 - REAR FLOOR PAN
    2 - REAR SEAT LATCH(S)
    3 - ATTACHING BOLTS
  6. Remove latches (2), if necessary. Remove attaching bolts (3) and remove latch (2).