Front Seat Back Cover/Foam: Removal: Convertible
WARNING:
Before servicing the seat back cover the airbag system must be disarmed. Failure to do so may result in accidental deployment of the airbag and possible personal injury. Refer to RESTRAINTS - SERVICE INFORMATION
for service procedures.
- Remove seat from vehicle. (Refer to BODY/SEATS/SEAT - REMOVAL) .
- Remove headrest. (Refer to BODY/SEATS/HEADREST - REMOVAL) .
1 - TRIM TOOL 2 - HEADREST ADJUSTER CAP - Remove headrest adjuster caps (2).
1 - HEADREST ADJUSTER CAP WITH RELEASE TAB 2 - HEADREST ADJUSTER CAP WITH BUTTON - Remove seat back. (Refer to BODY/SEATS/SEAT BACK - REMOVAL) .
1 - ATTACHING SCREWS 2 - SIDE AIRBAG PLASTIC COVER - Roll seat back cover to clear seat airbag plastic cover and remove cover.
1 - ATTACHING NUTS - Remove nuts (1) attaching seat airbag to seat back frame and move airbag module from the frame.
1 - SEAT BACK COVER 2 - AIRBAG SLEEVE - Remove seat airbag from the sleeve (2) in the seat back cover (1).
1 - HOOK AND LOOP 2 - HOG RINGS - Roll seat back cover upward to show hog rings (2). Cut hog rings to free cover.
1 - HOG RINGS - Separate seat back cover and foam.