LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Electrical >> Gauges >> Interior & Exterior (2 Of 2) >> Interior >> Rear Quarter Panel Trim -Convertible >> Removal >> Removal - Convertible

Removal - Convertible

Fig 1: Check Strap
GC0022409Courtesy of DAIMLERCHRYSLER CORP.
1 - CHECK STRAP
2 - ATTACHING SCREW
  1. Fold rear seats flat.
  2. Remove attaching screw (2) from left and right rear seat fold forward check strap (1).
    Fig 2: Pivot Cover Bezel
    GC0022408Courtesy of DAIMLERCHRYSLER CORP.
    1 - REAR SEAT PIVOT BRACKET
    2 - PIVOT COVER BEZEL
  3. Remove rear seat pivot bezels and striker bezel.
    Fig 3: Quarter Trim Panel
    GC0022417Courtesy of DAIMLERCHRYSLER CORP.
    1 - SEAT BELT
    2 - ATTACHING SCREW(S)
    3 - FOLDING TOP PIVOT BRACKET
    4 - QUARTER TRIM BRACKET NUT
    5 - QUARTER TRIM BRACKET
    6 - REAR SEAT SUPPORT
    7 - LOWER ANCHOR ATTACHING NUT
  4. Remove rear seat. (Refer to BODY/SEATS/SEAT - REMOVAL) .
  5. Remove rear seat lower seat belt anchor attaching bolt.
  6. Release J-strap at upper seat back slingwell.
  7. Remove bolster from rear seat back support and move bolster out of the way. (Refer to BODY/SEATS/REAR SEAT BOLSTER - REMOVAL) .
  8. Remove lower seat belt anchor at B-pillar.
  9. Remove turning loop anchor attaching bolt.
  10. Move door sill scuff plate to allow removal of quarter trim panel.
  11. Remove screws attaching quarter trim panel.
  12. Remove quarter trim panel.
scientia non olet · About LEMON Manuals