Specifications - Body Gap And Flush Measurements - Convertible

INDEX

DESCRIPTION	FIGURE
BODY GAP AND FLUSH	Fig 1.

Fig 1: GAP AND FLUSH

Courtesy of DAIMLERCHRYSLER CORP.

	LOCATION	GAP	FLUSH
1	HOOD TO GRILLE	PARALLEL WITHIN 2.0	GRILLE ENDS 5.0
			GRILLE CENTER 7.0
			UNDERFLUSH +/- 1.0
2	HOOD TO FENDER	6.0 +/- 1.0 PARALLEL WITHIN 1.0	FENDER FRONT OVERFLUSH 1.5 +/- 1.0
			FENDER MIDDLE & REAR +/- 1.0
			CONSISTENT WITHIN 1.0
3	HOOD TO DOOR	5.0 +/- 1.0 PARALLEL WITHIN 1.0	+/- 1.5 CONSISTENT WITHIN 1.0
4	FRONT DOOR TO FENDER	5.2 +/- 1.0 PARALLEL WITHIN 1.0	+0.9 LOWER AREA UNDERFLUSH 1.0 +/- 1.0 CONSISTENT WITHIN 1.0
5	FENDER TO SILL	4.5 +/- 1.5 PARALLEL WITHIN 1.0	+/- 2.0 NEVER UNDERFLUSH
6	FRONT DOOR TO SILL	6.0 +/- 1.5 PARALLEL WITHIN 1.0	UNDERFLUSH 1.0 +/- 1.0
7	DOOR TO BODY SIDE	4.5 +/- 1.0 PARALLEL WITHIN 1.0	+/- 1.0 CONSISTENT WITHIN 1.0
8	BODY SIDE TO FUEL FILLER	3.0 +/- 1.0 CONSISTENT WITHIN 1.0	BODY SIDE 0.5 OVERFLUSH +/- 0.75
9	DECKLID TO BODY SIDE	4.0 +/- 1.0 PARALLEL WITHIN 1.0	DECKLID UNDERFLUSH 1.0 +/- 1.0 CONSISTENT WITHIN 1.0
10	DECKLID TO REAR FASCIA	7.0 +/- 1.5 PARALLEL WITHIN 1.0	N/A
NOTE: NOTE: ALL MEASUREMENTS ARE IN MILLIMETERS