Lock Cylinder-Glove Box: Installation

Fig 1: Tumblers-Glove Box Lock Removal & Installation

Courtesy of DAIMLERCHRYSLER CORP.

NOTE: Be sure to install each tumble into their correct location within the lock cylinder.

If removed, install the springs (2) and the tumblers (1) into the glove box lock cylinder (3) in the order in which they were removed.

Fig 2: Lock-Glove Box Install 1
Courtesy of DAIMLERCHRYSLER CORP.
Install the ignition key (1) and the glove box lock cylinder (2) into the glove box latch (3) as an assembly.

Fig 3: Lock-Glove Box Install 2
Courtesy of DAIMLERCHRYSLER CORP.
Rotate the ignition key (1) counterclockwise until the lock cylinder (2) is fully retained in the glove box latch (3).
Install the glove box latch onto the glove box door (Refer to BODY/INSTRUMENT PANEL/LATCH-GLOVE BOX - INSTALLATION) .