LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Cluster (Service Information) >> Service Information >> Description >> Notes

Service Information: Description: Notes

Fig 1: View Of Cluster Components
GC0043619Courtesy of DAIMLERCHRYSLER CORP.

The instrument cluster is an Electro-Mechanical Instrument Cluster (EMIC) that is located in the instrument panel above the steering column opening, directly in front of the driver. The instrument cluster includes the hardware and software necessary to serve as the electronic body control module and is sometimes referred to as the Cab Compartment Node (CCN) (1, 2, and 3). The remainder of the CCN, including the mounts and the electrical connections, are concealed within the instrument panel behind the cluster bezel. Besides analog gauges and indicators, the CCN incorporates a single blue-green digital Vacuum Fluorescent Display (VFD) unit for displaying odometer/trip odometer information, engine hours, automatic transmission gear selector position (PRNDL), several warning or reminder indications and certain diagnostic information.

The CCN gauges and indicators are visible through a dedicated opening in the cluster bezel on the instrument panel and are protected by a clear plastic cluster lens (1). Just behind the cluster lens is the cluster hood and an integral cluster mask (2). The cluster hood and mask are serviced with the lens (1 and 2).

Sandwiched between the rear cover and the lens is the cluster housing (3). The molded plastic cluster housing serves as the carrier for the cluster circuit board and circuitry, the cluster connector receptacles, the gauges, a Light Emitting Diode (LED) for each cluster indicator, the VFD unit, an audible tone transducer, the cluster overlay, the gauge pointers, the odometer/trip odometer switch and the Electronic Vehicle Information Center Display (EVIC) switch button.