LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Electrical >> Gauges >> Clock (Service Information) >> Service Information >> Removal

Service Information: Removal

Fig 1: Bezel IP Center
GC0043059Courtesy of DAIMLERCHRYSLER CORP.
  1. Disconnect and isolate the battery negative cable.
  2. Remove the Instrument Panel Center Bezel (Refer to BODY/INSTRUMENT PANEL/INSTRUMENT PANEL CENTER BEZEL - REMOVAL) .
  3. Remove the two retaining screws (1) holding the clock to the rear of the I/P Center Bezel.
    Fig 2: Clock Retaining Screws
    GC0015723Courtesy of DAIMLERCHRYSLER CORP.
  4. To replace the clock illumination lamps (1), turn sockets counterclockwise to remove lamp and socket.
    Fig 3: Clock Illumination Lamps
    GC0015722Courtesy of DAIMLERCHRYSLER CORP.
scientia non olet · About LEMON Manuals