LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Body & Frame >> Sun Roof/T-Top/Convertible Top >> Power Top & Sunroof >> Switch - Sunroof >> Installation

Switch - Sunroof: Installation

  1. Install the switch in the overhead console assembly. Be certain the switch is securely snapped in place.
  2. Connect the sunroof control switch electrical connector. Be certain the switch connector is securely snapped in place.
  3. Install the overhead console.
  4. Connect the battery negative cable.
  5. Confirm proper sunroof system operation.
scientia non olet · About LEMON Manuals