LEMON Manuals: Even more car manuals for everyone
Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Body & Frame >> Seats >> Heated Seat System - Electrical Diagnostics >> Electrical Diagnostics >> DTC Troubleshooting >> B221A-Heated Seat Module Internal >> Diagnostic Test

Diagnostic Test

  1. 1)  VERIFY THAT DTC B221A-HEATED SEAT MODULE INTERNAL IS ACTIVE 

    With the scan tool, record and erase DTC's

    Cycle the ignition switch off then back on.

    With the scan tool, read DTC's.

    Does the DTC B221A-HEATED SEAT MODULE INTERNAL reset? 

    Yes 

    1. Replace the Heated Seat Module.
    2. Perform BODY VERIFICATION TEST - VER 1. (Refer to BODY VERIFICATION TEST - VER 1 ).

    No 

    1. The conditions that caused this code to set are not present at this time. Using the wiring diagram/schematic as a guide, inspect the wiring and connectors.
    2. Perform BODY VERIFICATION TEST - VER 1. (Refer to BODY VERIFICATION TEST - VER 1 ).
scientia non olet · About LEMON Manuals