LEMON Manuals: Even more car manuals for everyone

Home >> Chrysler >> 2006 >> PT Cruiser Base, 2D Convertible, Standard >> Repair and Diagnosis >> Body & Frame >> Seats >> Heated Seat System - Electrical Diagnostics >> Electrical Diagnostics >> DTC Troubleshooting >> B2182- Heated Seat Module Power Supply High >> Set Conditions

Set Conditions

Set Condition:
This code is set immediately if the Heated Seat Module detects voltage over 16.0 volts on the (F937) Fused Ignition Switch Output (Run) circuit.

scientia non olet · About LEMON Manuals